Year: 2021

check valve
Peter Lee

Normal reasons that cause the valves can not close tightly and how to deal with it?

Under normal circumstances, if it is not tightly closed, first check to see if the valve is closed in place. If it has been closed in place, there is still leakage and cannot be sealed, then check the sealing surface. If the vice-sealing pair can be disassembled, then take it out for grinding and test again. Of course, if it is still not closed tightly, then it must be returned to the factory for repair or replacement of the valve, so as not to affect the normal use of the valve and accidents such as working conditions.

VIEM MORE »
u type butterfly valve dn2200 (1)
Peter Lee

Let we talk about industrial valve sealing type!

Today, we talk about 2 Types industrial valve sealing type

The seal is also a very critical component in the valve. The sealing performance of the valve refers to the ability of each sealing part of the valve to prevent the leakage of the medium. It is the most important technical performance index of the valve.

VIEM MORE »
large size butterfly valve
Peter Lee

What are main factors affecting industrial valve sealing?

There are many factors that affect valve sealing, We can find there are 4 main elements.

mainly as follows:

1. Sealing structure

Under the change of temperature or sealing force, the structure of the vice-sealing part will change. Moreover, this change will affect and change the force between the vice-sealing part, thereby reducing the performance of the valve sealing.

VIEM MORE »
Water hammer effect of Industrial valve
Peter Lee

Water hammer effect of Industrial valve

It means that when the opened valve is suddenly closed, due to the inertia of the pressurized water flow, a water shock wave is generated and has a destructive effect. This is the “water hammer effect” in hydraulics, that is, positive water hammer.

VIEM MORE »
check valve
Peter Lee

What does the arrow on the valve body mean?

The arrow marked on the valve body is the recommended pressure-bearing direction of the valve, not the flow direction of the pipeline medium. The valve with two-way sealing function may not be marked with an indicating arrow, or with an arrow, because the valve arrow refers to the recommended pressure direction. It is better to have one direction in the left and right or up and down directions.

VIEM MORE »
Peter Lee

“Methods” to solve valve leakage

Valve leakage has become one of the main leakage sources in the device, so it is very important to improve the valve’s anti-leakage capability. To prevent valve leakage, it is necessary to master the basic knowledge of valve sealing parts to prevent medium leakage-valve sealing, this is the most important thing.Principle of valve sealing

VIEM MORE »
butterfly valves stem
Peter Lee

Let we talk about selecting material of stem and stem nut for industrial valves.

when selecting the valve stem material, it is necessary to ensure that the industrial valve stem has sufficient strength, good impact toughness, and corrosion resistance at the specified temperature. The industrial  valve stem is fragile, so attention should be paid to the machining performance and heat treatment performance of the material when selecting it.

VIEM MORE »
Peter Lee

Advantages and disadvantages of diaphragm valves

Diaphragm valve: refers to a flexible membrane or combined diaphragm installed in the valve body and bonnet, and the closing part is a compression device connected with the diaphragm. The valve seat can be a weir shape or a straight through type.

VIEM MORE »
Peter Lee

The advantages and disadvantages of commonly used valves

According to the purpose and function of the valve, it can be divided into

1.1 Shut-off valves (its role is to connect and cut off the medium in the pipeline, such as ball valves, gate valves, globe valves, butterfly valves and diaphragm valves);

1.2 Regulating valves (its role is to adjust the parameters of the flow and pressure of the medium, such as regulating valves, throttle valves and pressure reducing valves, etc.);

VIEM MORE »

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@stablevalves.com”